WOOD FLOOR SANDER ORBITAL FLOOR SANDER

Small lightweight floor sander polishing machine

 

model G-SL254
voltage 110v/220V,50/60HZ
power 275W
working width 254mm(10″)
working speed 300rpm
weight 12.5kg
standard accessories 40#,60#,80#,120# sanding paper and polishing pad

 

 

 

Compare

Description

 

Model Number:
G-SL254
Type:
FLOOR SANDER FLOOR POLISHER

Orbital Wood Floor Sander

 

Model G-SL254
Voltage 110V/220V, 50/60HZ
Power 275W
Working width 254mm(10″)
Working speed 300RPM
Weight 12.5kg
Size 99*33*30cm
Accessories 40#,60#,80#,120# sand paper and white polishing pad

 

Product Description

1. Used in staircase, house and small areas;

2. Multi- purpose machine to strip, wax, buff, sand and refinish your surface floor and even dry clean your carpet whether you have marble, vinyl, wood or carpet;

3. No torque, no brush marks, no sanding marks, no swirls, no experience needed to operate

4. Lightweight, so it is easy to take anywhere. Because of the larger orbit, you can clean faster with less weight.

5. Engineered for quiet and smooth operation.

Product Uses

 

Press both sides of screw box inwards and pull it out; take out screw by impact. Align the mounting hole of control handle with the mounting hole of chassis, install the screw and tighten the nut; Put screw box into on chassis.

Keep pad holder or brush flat on the floor, take hold of chassis and lift machine with both hands, align brush holder pad with pad holder or brush, push chassis hard, make pad holder or brush level and place it properly.

Lay the machine on its back with the handle lying on the floor; Turn over chassis backward and shown pad holder or brush, remove pad holder or brush on the brush holder pad.

Rotate the handle to the highest point, insert the pin in the special-purpose hole of motion, hold tight handle and makes the two wheels drop to the ground, than can push or pull the machine to move.

Application

The only floor machine designed to strip, wax, buff, sand and refinish your hard surface and even dry clean your carpets so you can use them immediately.

Whether you have marble, wood, carpet or other kind of floor, this Floor Machine patent oscillating motion assures you of the easiest operation and maintenance. It’s a “NO” Floor Machine

NO torque, NO brush marks, NO sanding marks, NO swirls, NO gears, NO motor brushes to wear out, NO belts, NO water to soil and mildew carpets and best of all NO experience needed.

Advantages

Easy operation, no experience needed.

Engineered for quiet and smooth operation.

Lightweight, so it is easy to take anywhere. Because of the larger orbit, you can clean faster with less weight.

This is truly a multi-purpose machine.

The only floor machine designed to strip, wax, buff, sand and refinish your hard surface and even dry clean your carpets so you can use them immediately.

 

Reviews

There are no reviews yet.

Be the first to review “WOOD FLOOR SANDER ORBITAL FLOOR SANDER”

Your email address will not be published. Required fields are marked *